Sheet Pile NZ has the largest locally-based stock in New Zealand and, with three yards nationwide, we’re able to get you what you need, when you need it. Below we have compiled an up-to-date technical data sheet for all products we regularly have in stock.
We’ve made it easy for you! Simply research your stock options with us and get in touch for a quote.
Regularly stocked sheet pile includes:
- SP3W or STU1800
- SP3A or SP3
- SP4W or STU2700
- Z25-800
- SCH5-750
- V20J
Please note: The sheet pile listed below is what we usually have in stock, this may vary depending on supply and demand.
Name | Type | Lengths | Width | Tensile Grade | Common Uses |
---|---|---|---|---|---|
SP3W or STU1800 | U Type Hot Rolled | 16m 12m 10m 9m 8m 6m | 600mm | 390 355 295 | Temporary or permanent works, Hot Rolled Sheet Pile is good for multiple installations. Available in multiple lengths, a key feature of the SP3W is its ease when driving into poor ground |
SP3A or SP3 | U Type Hot Rolled | 12m 9m 6m | 400mm | 355 | Suitable for multiple installations, temporary or permanent works. Available in three different lengths, this product is good for driving into gravels or harder ground. Our SP3A U-Type Hot Rolled Sheet Pile is one of our main South Island stocked products |
SP4W or STU2700 | U Type Hot Rolled | 18m 15m 12m | 600mm | 390 | This is a heavy product and ideal for salt water environments. Suitable for high load walls, it is available for temporary and permanent works. Given the weight of the SP4W, installation is required by crane |
Z25-800 | Z Type Hot Rolled | 16m to 9m | 1600mm (2 x 800mm) | 390 | Z25-800 is a specialty product used mainly for permanent works. Ideal for high load walls and combination walls, normally installed by crane |
SCH5-750 | Cold Formed Hat Pile | 12m to 9m | 750mm | 355 | This is newly imported lightweight sheet at only 50kg/m2. Suitable for temporary shoring works, this specialty product can also be used as permanent installation for erosion control and light loaded walls |
V20J | Corner Sections | 10m & 5m | 104mm | 355 | The Corner Connectors come at a weight of 15kg per metre with interlock distances dependent on the sheet pile used. These Corner Connectors fit most common U-Type, Z-Type and Larssen interlock piles and can be used at multiple angles |