Sheet Piles are available either from NZ stocks or Overseas Steel Mills. Check prior to specifying on availability.
| Hat-Type Hot-Rolled Piles | W mm | H mm | T mm | Unit Mass kg/Lin m | Unit Mass kg/m2* | Sectional Area cm2/m* | Section Modulus cm3/m* | Moment of Interia cm4/m* |
|---|---|---|---|---|---|---|---|---|
| SP10H | 900 | 230 | 10.8 | 86.4 | 96.0 | 122.2 | 902 | 10,500 |
| SP25H | 900 | 300 | 13.2 | 113.0 | 126.0 | 160.4 | 1,610 | 24,400 |
| SP45H | 900 | 368 | 15.0 | 147.0 | 163.0 | 207.8 | 2,450 | 45,000 |
| SP50H | 900 | 370 | 17.0 | 167.0 | 186.0 | 236.3 | 2,760 | 51,100 |
*Per 1m of Pile Wall Width
