Sheet Piles are available either from NZ stocks or Overseas Steel Mills. Check prior to specifying on availability.
| Hat-Type Cold-Formed Piles | W mm | H mm | T mm | Unit Mass kg/Lin m | Unit Mass kg/m2* | Sectional Area cm2/m* | Section Modulus cm3/m* | Moment of Interia cm4/m* |
|---|---|---|---|---|---|---|---|---|
| SCH3 700 | 700 | 146 | 4.0 | 30.8 | 44.0 | 56.0 | 265 | 1,945 |
| SCH4 700 | 700 | 148 | 6.0 | 46.2 | 66.0 | 84.3 | 410 | 3,080 |
| SCH5 750 | 750 | 250 | 4.0 | 37.4 | 49.9 | 63.6 | 511 | 6,535 |
| SCH6 750 | 750 | 251 | 5.0 | 46.6 | 62.2 | 79.2 | 632 | 8,142 |
| SCH7 750 | 750 | 252 | 6.0 | 55.7 | 74.3 | 94.7 | 750 | 9,732 |
| SCH10 750 | 750 | 253 | 7.0 | 68.6 | 91.5 | 116.6 | 956 | 11,880 |
| SCH11 750 | 750 | 254 | 8.0 | 78.6 | 104.8 | 133.5 | 1,093 | 13,586 |
*Per 1m of Pile Wall Width
